PETOL Strike Wrench Retainer
The PETOL HammerTight slugging wrench retainer is a unique, hands-free
device that holds a striking wrench, back-up wrench or a low-clearance torque
wrench in place to prevent hand injuries. HammerTight wrench retainers
eliminate the need for 2 people when operating a hammer wrench. The
HammerTight slugging wrench retainer also promotes safety in that it takes
worker’s hands out of the “line of fire.” The beauty of the HammerTight
striking wrench retainer is in its design. With the hammer wrench or box-end
wrench in place, simply thread the HammerTight slugging wrench retainer
over the stud and you’re ready to go. The spring-loaded retaining plate allows
the striking wrench to be indexed without having to unscrew the retainer.
Other innovative design features of the HammerTight hammer wrench
retainer include: powder coated spring and retaining plate, swivel tie-off ring
for fall prevention, and lathed barrel for easy spring compression. The
HammerTight striking wrench retainer provides a more ergonomic solution
to a dangerous job. Removing a second person eliminates the chance for
hand injury as well as allows for better body positioning from the worker
swinging the hammer.
The HammerTight
slugging wrench
retainers are available
from 5/8” to 2-1/2” stud
sizes and nut sizes from
1-1/4” to 3-7/8”. The
HammerTight striking
wrench retainer SMP-
HTS34178 set comes
with 10 Hammer Tight
sizes (3/4″ – 1-7/8″) and
a case with custom
foam inserts.
HammerTight hammer wrench retainers promote SMP’s message of safer and more efficient tool solutions by transforming a 2 person job into a 1 person
job while at the same time removing workers hands from dangerous swinging hammers.
